Show simple item record

dc.contributor.authorMugabi, Prince Jordan
dc.date.accessioned2021-05-11T11:00:16Z
dc.date.available2021-05-11T11:00:16Z
dc.date.issued2021-01-12
dc.identifier.citationMugabi, P.J. (2021). Design and construction of a water cooling unit for milling machine engines. (Unpublished undergraduate dissertation) Makerere University. Kampala,Ugandaen_US
dc.identifier.urihttp://hdl.handle.net/20.500.12281/10659
dc.descriptionA final year project report submitted to faculty of engineering department of Mechanical Engineering in partial fulfillment leading to the award of Bachelor’s degree in Mechanical Engineering from Makerere Universityen_US
dc.description.abstractThis project report contains information about design and construction of a water cooling unit for milling machines. There was need to address the sky rocketing temperatures and pollution of the coolant. The project was centered on the use of locally available materials to construct a heat exchanger that would improve the rate of cooling of the coolant and equally filter out foreign particles that actually wear out the pump blades causing the failure of the pump. The costs for repair and replacement of parts were quite high thus the need for this development. Much of the work revolved around the use of engineering knowledge to select system parameters for the heat exchanger, concept generation and material selection. All these were based on a customer centered approach after carrying out a sample customer survey.en_US
dc.language.isoenen_US
dc.publisherMakerere Universityen_US
dc.subjectWater cooling uniten_US
dc.subjectMilling machine enginesen_US
dc.titleDesign and construction of a water cooling unit for milling machine enginesen_US
dc.typeThesisen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record