| dc.contributor.author | Nahabwe, Emmanuel | |
| dc.date.accessioned | 2022-05-19T11:59:57Z | |
| dc.date.available | 2022-05-19T11:59:57Z | |
| dc.date.issued | 2021-12-07 | |
| dc.identifier.citation | Nahabwe, E. ( 2022) Design and construction of an FM receiver signal booster. ( MakUD) ( Unpublished undergraduate dissertation). Makerere University , Kampala, Uganda | en_US |
| dc.identifier.uri | http://hdl.handle.net/20.500.12281/12779 | |
| dc.description | A project report submitted to the Department of Physics in partial fulfillment of the requirements for the award of the Degree of Bachelor of Science with Education-Physical of Makerere University | en_US |
| dc.description.abstract | This research report was made to design and construct an FM receiver signal booster
to connect to an FM receiver antenna to boost FM reception. The FM receiver signal
booster was constructed using C547B P H01 transistor, 470µ H inductor, 1 MΩ resistor,
two 104 K capacitors and an antenna. Connecting the circuit on the FM receiver antenna
and tuning to the unclear radio signal, the radio signal became clear. The signal that was
originally full of noise that it could hardly be heard became very clear and loud. This
result was in good correlation to the ones obtained using a CRO where the frequencies
between 100 KHz and 180 kHz. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Makerere University | en_US |
| dc.subject | FM receiver signal booster design | en_US |
| dc.subject | FM receiver antenna | en_US |
| dc.subject | FM reception boost | en_US |
| dc.title | Design and construction of an FM receiver signal booster | en_US |
| dc.type | Thesis | en_US |
